Installing AutoEdge|TheFactory on 11.6 Classroom Edition

Hello Peter

Thanks for the swift reply.  The DB restore worked fine so maybe just a case of adding the DB manually.  Does the installer create an installation log file?

Please let me know how you get on with your 11.6 test.

Cheers.

The installer uses InnoSetup, and there are some switches you can use to control the verbosity/logging: www.jrsoftware.org/.../topic_setupcmdline.htm

I did a quick install and the DB and appservers are written into my conmgrp. and  ubroker.properties files, using the 64-bit version on Windows 7.

Hello Peter

The install process created aetf.conmgr.properties and aetf.ubroker.properties files so I cut'n'pasted their contents into the actual .properties.  The database now starts OK but appserver fails.  Unfortunately I'm not familiar with AppServer so will need some assistance.  The log file is as following:

[15/11/18@08:18:50.222+0000] P-008960 T-007104 1 AS -- Logging level set to = 2

[15/11/18@08:18:50.222+0000] P-008960 T-007104 1 AS -- Log entry types activated: ASPlumbing,DB.Connects

[15/11/18@08:18:50.222+0000] P-008960 T-007104 2 AS AS Starting application server for asAutoEdgeTheFactory. (5560)

[15/11/18@08:18:50.259+0000] P-008960 T-007104 2 AS AS Application Server Startup. (5473)

[15/11/18@08:18:50.856+0000] P-008960 T-007104 1 AS -- (Procedure: 'OpenEdge/CommonInfrastructure/Server/as_startup.p' Line:59) *** Progress.Lang.AppError

[15/11/18@08:18:50.856+0000] P-008960 T-007104 1 AS -- (Procedure: 'OpenEdge/CommonInfrastructure/Server/as_startup.p' Line:60) AutoEdge.Factory.Server.Common.CommonInfrastructure.TenantManager is not a valid type

[15/11/18@08:18:50.856+0000] P-008960 T-007104 1 AS -- (Procedure: 'OpenEdge/CommonInfrastructure/Server/as_startup.p' Line:61) ArgumentIsValidType OpenEdge.Lang.Assert at line 197  (.\referencecomponents\support\bin\OpenEdge\Lang\Assert.r)

[15/11/18@08:18:50.856+0000] P-008960 T-007104 1 AS -- (Procedure: 'OpenEdge/CommonInfrastructure/Server/as_startup.p' Line:61) To OpenEdge.Core.InjectABL.Binding.BindingBuilder at line 83  (.\referencecomponents\injectabl\bin\OpenEdge\Core\InjectABL\Binding\BindingBuilder.r)

[15/11/18@08:18:50.856+0000] P-008960 T-007104 1 AS -- (Procedure: 'OpenEdge/CommonInfrastructure/Server/as_startup.p' Line:61) Load AutoEdge.Factory.Server.InjectABL.CommonModule at line 48  (.\autoedgethefactory\server\bin\AutoEdge\Factory\Server\InjectABL\CommonModule.r)

[15/11/18@08:18:50.856+0000] P-008960 T-007104 1 AS -- (Procedure: 'OpenEdge/CommonInfrastructure/Server/as_startup.p' Line:61) OnLoad OpenEdge.Core.InjectABL.Binding.Modules.InjectionModule at line 70  (.\autoedgethefactory\server\bin\OpenEdge\Core\InjectABL\Binding\Modules\InjectionModule.r)

[15/11/18@08:18:50.856+0000] P-008960 T-007104 1 AS -- (Procedure: 'OpenEdge/CommonInfrastructure/Server/as_startup.p' Line:61) Load OpenEdge.Core.InjectABL.KernelBase at line 162  (.\referencecomponents\commoninfrastructure\shared\bin\OpenEdge\Core\InjectABL\KernelBase.r)

[15/11/18@08:18:50.856+0000] P-008960 T-007104 1 AS -- (Procedure: 'OpenEdge/CommonInfrastructure/Server/as_startup.p' Line:61) C:\Program Files (x86)\OpenEdgeAE\AutoEdge\Factory\autoedgethefactory\server\bin\load_injectabl_modules.r at line 36  (C:\Program Files (x86)\OpenEdgeAE\AutoEdge\Factory\autoedgethefactory\server\bin\load_injectabl_modules.r)

[15/11/18@08:18:50.856+0000] P-008960 T-007104 1 AS -- (Procedure: 'OpenEdge/CommonInfrastructure/Server/as_startup.p' Line:61) Load OpenEdge.Core.InjectABL.KernelBase at line 225  (.\referencecomponents\commoninfrastructure\shared\bin\OpenEdge\Core\InjectABL\KernelBase.r)

[15/11/18@08:18:50.856+0000] P-008960 T-007104 1 AS -- (Procedure: 'OpenEdge/CommonInfrastructure/Server/as_startup.p' Line:61) Load OpenEdge.Core.InjectABL.KernelBase at line 252  (.\referencecomponents\commoninfrastructure\shared\bin\OpenEdge\Core\InjectABL\KernelBase.r)

[15/11/18@08:18:50.856+0000] P-008960 T-007104 1 AS -- (Procedure: 'OpenEdge/CommonInfrastructure/Server/as_startup.p' Line:61) OpenEdge/CommonInfrastructure/Common/start_session.p at line 101  (.\referencecomponents\commoninfrastructure\shared\bin\OpenEdge\CommonInfrastructure\Common\start_session.r)

[15/11/18@08:18:50.856+0000] P-008960 T-007104 1 AS -- (Procedure: 'OpenEdge/CommonInfrastructure/Server/as_startup.p' Line:61) OpenEdge/CommonInfrastructure/Server/as_startup.p at line 41  (.\referencecomponents\commoninfrastructure\server\bin\OpenEdge\CommonInfrastructure\Server\as_startup.r)

[15/11/18@08:18:50.856+0000] P-008960 T-007104 1 AS -- OpenEdge/CommonInfrastructure/Server/as_startup.p  startup procedure ended with an ERROR condition. (8025)

[15/11/18@08:18:50.857+0000] P-008960 T-007104 2 AS AS Application Server Shutdown. (5476)

Hi Grant,

The problem could be with  load_injectabl_modules.r outdate compiled version. Please check load_injectabl_modules.r compile date at location <install_dir>/autoedgethefactory/server/bin. May be because of this Appserver did not started. Delete this load_injectabl_modules.r file and re-compile. Then start Appserver.

Please check the following link, which will helps to solve this AutoEdge App-server issue.

knowledgebase.progress.com/.../Unable-to-start-the-AutoEdge-appserver

Regards,

Satyam

Hi Satyam

Thanks, I followed the KB instructions and the AppServer is now running :-)

As an aside, compile_loadinjectabl.p had routinelevel.i in it but this is nowhere in the AutoEdge install.  However I commented it out and the program then worked.

A little further...

Finished setup as per instructions (excluding the Savvion part).  Changed Dealer Reviewer GUI from prowin32.exe to prowin.exe and ran it but got the attached errors.  Have I missed something in the install process or does the Classroom Edition lack the required Infragistics .NET controls?

Hello Brian

Just tried that but no success.  If it helps here's a dump of the screen that came up:

Grant,

I am checking but I don't think the classroom edition installs the Infragistics controls.  If I am correct you will not be able to use AutoEdge unless you can (perhaps) download an eval/trial edition of the controls directly from Infragistics.

Brian

There nothing in the combo box at all!

I suspect you're right there, Brian.  I come from a V9 world so wouldn't know how to prove this for certain.

Grant,

Hmm .. I just got a response that says we do install an evaluation copy of Infragistics with the Classroom edition so now I am even more confused why you don't see anything in the combo box.

I'm going to install this here and play around with it.  I'll let you know what I find out.

Brian

Grant,

The Infragistics controls are installed, however, they appear not to be installed into the GAC.  Use the 'Update Assembly References' option again and for each Infragistics control use the browse button and navigate to C:\Progress\OpenEdge\bin\Infragistics\winforms and select the replacement.

Brian

Many thhanks for looking into this Brian.

I've updated the assemblies as per your instructions, however the following message came up for every one I selected (with different .dll name for each) and AutoEdge is still trying to use the v13 versions:

Think its all sorted now - did a rebuild and AutoEdge can now run.  Haven't looked at it in depth yet though.  Thanks for your help.

As part of OEDK (Classroom edition) we only install Trail version of Telerik controls. Infragistics (Ultra controls) are not part of OEDK. As OEDK only installs Progress developer studio component. Infragistics is another component we have as Ultra Controls. Not sure if this has changed.

Easy way to check Infragistics are installed or not by opening License Info from windows menu under Progress -> OpenEdge 11.6 (64-bit). It should have entry 'Product Name:   OE Ultra Controls .NET'.

Thanks,

Swathi.

Spoke to soon.  Attempted to log into AutoEdge and got this:

Hello Swathi

All I get is "Progress Dev Studio OE".

Thanks for your time Brian, much appreciated.  I think I've spent enough time struggling with this so I'll forget it for now and just get on with the all the online OE training videos instead.

I ran into the same problem with the Assemblies not working for the Infragistics-components.

By recompiling the client branch of the project I could solve the problem.

I'd suggest to update the "Getting started" page. There was also a recompile of the server branch necessary to startup the aetf-appserver.

It is also not obvious where to find users and passwords. The link to applicationusers.txt should also be on the "Getting Started" page.