Hi,
I downloaded the latest version of dynamics 2 using a complete checkout
in WinCVS yesterday morning and did a complete compile using the PBUILD
utility. I created a new repository database using the
src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the
file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the
src/icf/db/icg/dump directory.
I have no problem running most of the dynamics tools (including new
tools like the container builder).
Only (?) the repository maintenace tool does not work at all. When I run
it from the appbuilder menu (build) I get the nasty "OK to quit
AppBuilder?" message. When I run it from the dynamic launcher the
waiting clock is shown for a while but nothing else.
As this ended up with no success I loaded all (819) .ado files.
Am I missing anything? ADO or sourcecode? Or is this a known bug? Any
help appreciated.
Best regards,
Mike
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
Hi Mike,
What version of Progress are you running?
Regards,
Mark Davies
Senior Analyst Programmer
MIP
Tel: +27 (0)11 803 1281
Fax: +27 (0)11 807 1732
E-Mail: markd@mip.co.za
PO Box 2899, Rivonia, 2128
Johannesburg, South Africa
Avoid people who say they know the answer. Keep the company of people who
are trying to understand the question.
-Original Message-
Sent: 20 August 2002 09:18
To: dev@icf.possenet.org
Subject: Error running repository maintenance tool
Hi,
I downloaded the latest version of dynamics 2 using a complete checkout
in WinCVS yesterday morning and did a complete compile using the PBUILD
utility. I created a new repository database using the
src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the
file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the
src/icf/db/icg/dump directory.
I have no problem running most of the dynamics tools (including new
tools like the container builder).
Only (?) the repository maintenace tool does not work at all. When I run
it from the appbuilder menu (build) I get the nasty "OK to quit
AppBuilder?" message. When I run it from the dynamic launcher the
waiting clock is shown for a while but nothing else.
As this ended up with no success I loaded all (819) .ado files.
Am I missing anything? ADO or sourcecode? Or is this a known bug? Any
help appreciated.
Best regards,
Mike
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
Hi Mark,
I am using 9.1D.
This is what Help - About returns:
PROGRESS AppBuilder
Version 9.1D
PROGRESS Version 9.1D as of Wed May 8 17:24:00 EDT 2002
Mike
-Ursprüngliche Nachricht-
Gesendet: Dienstag, 20. August 2002 11:26
An: dev@icf.possenet.org
Betreff: RE: Error running repository maintenance tool
Hi Mike,
What version of Progress are you running?
Regards,
Mark Davies
Senior Analyst Programmer
MIP
Tel: +27 (0)11 803 1281
Fax: +27 (0)11 807 1732
E-Mail: markd@mip.co.za
PO Box 2899, Rivonia, 2128
Johannesburg, South Africa
Avoid people who say they know the answer. Keep the company of people
who are trying to understand the question.
-Original Message-
Sent: 20 August 2002 09:18
To: dev@icf.possenet.org
Subject: Error running repository maintenance tool
Hi,
I downloaded the latest version of dynamics 2 using a complete checkout
in WinCVS yesterday morning and did a complete compile using the PBUILD
utility. I created a new repository database using the
src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the
file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the
src/icf/db/icg/dump directory.
I have no problem running most of the dynamics tools (including new
tools like the container builder).
Only (?) the repository maintenace tool does not work at all. When I run
it from the appbuilder menu (build) I get the nasty "OK to quit
AppBuilder?" message. When I run it from the dynamic launcher the
waiting clock is shown for a while but nothing else.
As this ended up with no success I loaded all (819) .ado files.
Am I missing anything? ADO or sourcecode? Or is this a known bug? Any
help appreciated.
Best regards,
Mike
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
Mike,
Are you running Appserver? If so, what do your client and server session
settings look like (in your .xml file)? Are you sure you're running on the
latest ADM2 stuff (PROPATH)?
Also, although this may not be relevant to the issue you're experiencing,
you'll have to set your site number.
Regards,
Neil
-Original Message-
Sent: 20 August 2002 11:44
To: dev@icf.possenet.org
Cc: marksd@mip.co.za
Subject: AW: Error running repository maintenance tool
Hi Mark,
I am using 9.1D.
This is what Help - About returns:
PROGRESS AppBuilder
Version 9.1D
PROGRESS Version 9.1D as of Wed May 8 17:24:00 EDT 2002
Mike
-Ursprüngliche Nachricht-
Gesendet: Dienstag, 20. August 2002 11:26
An: dev@icf.possenet.org
Betreff: RE: Error running repository maintenance tool
Hi Mike,
What version of Progress are you running?
Regards,
Mark Davies
Senior Analyst Programmer
MIP
Tel: +27 (0)11 803 1281
Fax: +27 (0)11 807 1732
E-Mail: markd@mip.co.za
PO Box 2899, Rivonia, 2128
Johannesburg, South Africa
Avoid people who say they know the answer. Keep the company of people
who are trying to understand the question.
-Original Message-
Sent: 20 August 2002 09:18
To: dev@icf.possenet.org
Subject: Error running repository maintenance tool
Hi,
I downloaded the latest version of dynamics 2 using a complete checkout
in WinCVS yesterday morning and did a complete compile using the PBUILD
utility. I created a new repository database using the
src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the
file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the
src/icf/db/icg/dump directory.
I have no problem running most of the dynamics tools (including new
tools like the container builder).
Only (?) the repository maintenace tool does not work at all. When I run
it from the appbuilder menu (build) I get the nasty "OK to quit
AppBuilder?" message. When I run it from the dynamic launcher the
waiting clock is shown for a while but nothing else.
As this ended up with no success I loaded all (819) .ado files.
Am I missing anything? ADO or sourcecode? Or is this a known bug? Any
help appreciated.
Best regards,
Mike
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
Hi Mike,
That is what we are running on too and the problem is not seen with the
latest download as of this morning.
The only thing I can think of is to maybe do a complete new download of
POSSE MAIN and a fresh PBUILD.
Regards,
Mark Davies
Senior Analyst Programmer
MIP
Tel: +27 (0)11 803 1281
Fax: +27 (0)11 807 1732
E-Mail: markd@mip.co.za
PO Box 2899, Rivonia, 2128
Johannesburg, South Africa
Avoid people who say they know the answer. Keep the company of people who
are trying to understand the question.
-Original Message-
Sent: 20 August 2002 10:44
To: dev@icf.possenet.org
Cc: marksd@mip.co.za
Subject: AW: Error running repository maintenance tool
Hi Mark,
I am using 9.1D.
This is what Help - About returns:
PROGRESS AppBuilder
Version 9.1D
PROGRESS Version 9.1D as of Wed May 8 17:24:00 EDT 2002
Mike
-Ursprüngliche Nachricht-
Gesendet: Dienstag, 20. August 2002 11:26
An: dev@icf.possenet.org
Betreff: RE: Error running repository maintenance tool
Hi Mike,
What version of Progress are you running?
Regards,
Mark Davies
Senior Analyst Programmer
MIP
Tel: +27 (0)11 803 1281
Fax: +27 (0)11 807 1732
E-Mail: markd@mip.co.za
PO Box 2899, Rivonia, 2128
Johannesburg, South Africa
Avoid people who say they know the answer. Keep the company of people
who are trying to understand the question.
-Original Message-
Sent: 20 August 2002 09:18
To: dev@icf.possenet.org
Subject: Error running repository maintenance tool
Hi,
I downloaded the latest version of dynamics 2 using a complete checkout
in WinCVS yesterday morning and did a complete compile using the PBUILD
utility. I created a new repository database using the
src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the
file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the
src/icf/db/icg/dump directory.
I have no problem running most of the dynamics tools (including new
tools like the container builder).
Only (?) the repository maintenace tool does not work at all. When I run
it from the appbuilder menu (build) I get the nasty "OK to quit
AppBuilder?" message. When I run it from the dynamic launcher the
waiting clock is shown for a while but nothing else.
As this ended up with no success I loaded all (819) .ado files.
Am I missing anything? ADO or sourcecode? Or is this a known bug? Any
help appreciated.
Best regards,
Mike
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
Hi,
I did a new checkout of module posseall with the default branch and a
complete compile using PBUILD.
I am using the default icfconfig.xml file of this version. I am starting
using the ICFDef sessiontype without AppServer connection.
I found the European numeric-format as the cause of this error. If I
change the numeric-format before starting the repository maintenance
tools using session:numeric-format = "American" in a procedure editor I
am able to run the tool! Setting the value back to "European" prevents
the tool from being started again. I will log an issue.
I use the European numeric format as a setting in my startup.pf file as
I guess many Europoean customers are doing.
Thanks for any hint's about session setting.
Mike
-Ursprüngliche Nachricht-
Gesendet: Dienstag, 20. August 2002 12:53
An: dev@icf.possenet.org
Betreff: RE: Error running repository maintenance tool
Hi Mike,
That is what we are running on too and the problem is not seen with the
latest download as of this morning.
The only thing I can think of is to maybe do a complete new download of
POSSE MAIN and a fresh PBUILD.
Regards,
Mark Davies
Senior Analyst Programmer
MIP
Tel: +27 (0)11 803 1281
Fax: +27 (0)11 807 1732
E-Mail: markd@mip.co.za
PO Box 2899, Rivonia, 2128
Johannesburg, South Africa
Avoid people who say they know the answer. Keep the company of people
who are trying to understand the question.
-Original Message-
Sent: 20 August 2002 10:44
To: dev@icf.possenet.org
Cc: marksd@mip.co.za
Subject: AW: Error running repository maintenance tool
Hi Mark,
I am using 9.1D.
This is what Help - About returns:
PROGRESS AppBuilder
Version 9.1D
PROGRESS Version 9.1D as of Wed May 8 17:24:00 EDT 2002
Mike
-Ursprüngliche Nachricht-
Gesendet: Dienstag, 20. August 2002 11:26
An: dev@icf.possenet.org
Betreff: RE: Error running repository maintenance tool
Hi Mike,
What version of Progress are you running?
Regards,
Mark Davies
Senior Analyst Programmer
MIP
Tel: +27 (0)11 803 1281
Fax: +27 (0)11 807 1732
E-Mail: markd@mip.co.za
PO Box 2899, Rivonia, 2128
Johannesburg, South Africa
Avoid people who say they know the answer. Keep the company of people
who are trying to understand the question.
-Original Message-
Sent: 20 August 2002 09:18
To: dev@icf.possenet.org
Subject: Error running repository maintenance tool
Hi,
I downloaded the latest version of dynamics 2 using a complete checkout
in WinCVS yesterday morning and did a complete compile using the PBUILD
utility. I created a new repository database using the
src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the
file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the
src/icf/db/icg/dump directory.
I have no problem running most of the dynamics tools (including new
tools like the container builder).
Only (?) the repository maintenace tool does not work at all. When I run
it from the appbuilder menu (build) I get the nasty "OK to quit
AppBuilder?" message. When I run it from the dynamic launcher the
waiting clock is shown for a while but nothing else.
As this ended up with no success I loaded all (819) .ado files.
Am I missing anything? ADO or sourcecode? Or is this a known bug? Any
help appreciated.
Best regards,
Mike
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
Thanks a lot Mike for persevering with this one - we will get it fixed ASAP.
Regards
Anthony
Anthony D Swindells
Lead Architect, Progress Dynamics
Progress Software Corporation
aswindel@progress.com
-Original Message-
Sent: Tuesday, August 20, 2002 7:52 AM
To: dev@icf.possenet.org
Subject: AW: Error running repository maintenance tool
Hi,
I did a new checkout of module posseall with the default branch and a
complete compile using PBUILD.
I am using the default icfconfig.xml file of this version. I am starting
using the ICFDef sessiontype without AppServer connection.
I found the European numeric-format as the cause of this error. If I
change the numeric-format before starting the repository maintenance
tools using session:numeric-format = "American" in a procedure editor I
am able to run the tool! Setting the value back to "European" prevents
the tool from being started again. I will log an issue.
I use the European numeric format as a setting in my startup.pf file as
I guess many Europoean customers are doing.
Thanks for any hint's about session setting.
Mike
-Ursprüngliche Nachricht-
Gesendet: Dienstag, 20. August 2002 12:53
An: dev@icf.possenet.org
Betreff: RE: Error running repository maintenance tool
Hi Mike,
That is what we are running on too and the problem is not seen with the
latest download as of this morning.
The only thing I can think of is to maybe do a complete new download of
POSSE MAIN and a fresh PBUILD.
Regards,
Mark Davies
Senior Analyst Programmer
MIP
Tel: +27 (0)11 803 1281
Fax: +27 (0)11 807 1732
E-Mail: markd@mip.co.za
PO Box 2899, Rivonia, 2128
Johannesburg, South Africa
Avoid people who say they know the answer. Keep the company of people
who are trying to understand the question.
-Original Message-
Sent: 20 August 2002 10:44
To: dev@icf.possenet.org
Cc: marksd@mip.co.za
Subject: AW: Error running repository maintenance tool
Hi Mark,
I am using 9.1D.
This is what Help - About returns:
PROGRESS AppBuilder
Version 9.1D
PROGRESS Version 9.1D as of Wed May 8 17:24:00 EDT 2002
Mike
-Ursprüngliche Nachricht-
Gesendet: Dienstag, 20. August 2002 11:26
An: dev@icf.possenet.org
Betreff: RE: Error running repository maintenance tool
Hi Mike,
What version of Progress are you running?
Regards,
Mark Davies
Senior Analyst Programmer
MIP
Tel: +27 (0)11 803 1281
Fax: +27 (0)11 807 1732
E-Mail: markd@mip.co.za
PO Box 2899, Rivonia, 2128
Johannesburg, South Africa
Avoid people who say they know the answer. Keep the company of people
who are trying to understand the question.
-Original Message-
Sent: 20 August 2002 09:18
To: dev@icf.possenet.org
Subject: Error running repository maintenance tool
Hi,
I downloaded the latest version of dynamics 2 using a complete checkout
in WinCVS yesterday morning and did a complete compile using the PBUILD
utility. I created a new repository database using the
src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the
file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the
src/icf/db/icg/dump directory.
I have no problem running most of the dynamics tools (including new
tools like the container builder).
Only (?) the repository maintenace tool does not work at all. When I run
it from the appbuilder menu (build) I get the nasty "OK to quit
AppBuilder?" message. When I run it from the dynamic launcher the
waiting clock is shown for a while but nothing else.
As this ended up with no success I loaded all (819) .ado files.
Am I missing anything? ADO or sourcecode? Or is this a known bug? Any
help appreciated.
Best regards,
Mike
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org