Win XP Professional
Progress 9.1D patch 05
I have down loaded posse 3.0 baseline 3, and unpacked it all, but am
unsure how to proceed now to actually build the system. I have the old
wincvs.doc (icf 2 baseline 4), but am unsure of what may have changed,
and could not find an updated version on the
Posse site (but maybe I looked in the wrong place). I have down loaded
The Progress Dynamics documentation, but the install guide there doesn't
seem to be applicable either. So if someone has a few pointers as to
what I need to do next, they would be greatly appreciated.
--
/* =============================================================== */
I know you believe you understand what you think I said, but I am not
sure you realize that what you heard was not what I meant.
William E Colls President
Tel 613 591 0079 PROComputer Systems
Fax 613 591 3924 67 Willow Glen Dr.
www.procomsys.com Kanata Ontario K2M 1T1
Specialists in Progress Database systems since 1986
To unsubscribe, e-mail: dev-unsubscribe@dynamics.possenet.org
For additional commands, e-mail: dev-help@dynamics.possenet.org
William,
Have a look at this document:
http://docs.possenet.org/whitepapers/icf_and_cvs.pdf
It is a bit out of date but it should give you the basics to get your
environment up and running.
Regards,
Tom
William Colls wrote:
Win XP Professional
Progress 9.1D patch 05
>
I have down loaded posse 3.0 baseline 3, and unpacked it all, but am
unsure how to proceed now to actually build the system. I have the old
wincvs.doc (icf 2 baseline 4), but am unsure of what may have changed,
and could not find an updated version on the
Posse site (but maybe I looked in the wrong place). I have down loaded
The Progress Dynamics documentation, but the install guide there doesn't
seem to be applicable either. So if someone has a few pointers as to
what I need to do next, they would be greatly appreciated.
--
/* =============================================================== */
>
I know you believe you understand what you think I said, but I am not
sure you realize that what you heard was not what I meant.
>
William E Colls President
Tel 613 591 0079 PROComputer Systems
Fax 613 591 3924 67 Willow Glen Dr.
www.procomsys.com Kanata Ontario K2M 1T1
>
Specialists in Progress Database systems since 1986
>
To unsubscribe, e-mail: dev-unsubscribe@dynamics.possenet.org
For additional commands, e-mail: dev-help@dynamics.possenet.org
--
Tom Nordhougen
Progress Software Corp.
http://www.progress.com
>
The art of progress is to preserve order amid change, and
to preserve change amid order. -Alfred North Whitehead
To unsubscribe, e-mail: dev-unsubscribe@dynamics.possenet.org
For additional commands, e-mail: dev-help@dynamics.possenet.org
A couple things to note regarding the icf_and_cvs.pdf document:
- The icf directory (top level) has been renamed to dynamics
- There is no longer an rvdb database
- There is no need to load _seqvals.d into the icfdb database
- The correct PROPATH value for the client (icf.ini) should be:
c:\yourPosseDir\gui\dynamics,
c:\yourPosseDir\src\dynamics,
c:\yourPosseDir\src\dynamics\af\sup2,
c:\yourPosseDir\gui,
c:\yourPosseDir\gui\adecomm.pl,
c:\yourPosseDir\gui\adeicon.pl,
c:\yourPosseDir\gui\adeshar.pl,
c:\yourPosseDir\gui\adeuib.pl,
c:\yourPosseDir\gui\protools.pl,
c:\yourPosseDir\gui\adeedit.pl,
c:\yourPosseDir\gui\adedict.pl,
c:\yourPosseDir\gui\prodict.pl,
c:\yourPosseDir\gui\adecomp.pl,
c:\yourPosseDir\gui\adedesk.pl,
c:\yourPosseDir\gui\adexml.pl,
c:\yourPosseDir\gui\adeweb.pl,
c:\yourPosseDir,
c:\yourPosseDir\gui\aderes.pl,
c:\yourPosseDir\gui\adetran.pl,
c:\yourPosseDir\src,
C:\Program Files\PROGRESS\gui,
C:\Program Files\PROGRESS,
C:\Program Files\PROGRESS\bin
- You can create a new icfdb database using the DCU (Dynamics Configuration
Utility):
prowin32.exe -p c:\yourPosseDir\gui\dynamics\icfcfg.w -icfparam
DCUSETUPTYPE=ProgressSetup
This will ensure that your Dynamics site id is properly set.
Regards,
Tom
Original Message
Subject: Re: How to proceed from here
Date: Wed, 28 May 2003 18:19:41 -0400
From: Tom Nordhougen Reply-To: dev@dynamics.possenet.org
Organization: Progress Software Corporation
To: dev@dynamics.possenet.org
References: William,
Have a look at this document:
http://docs.possenet.org/whitepapers/icf_and_cvs.pdf
It is a bit out of date but it should give you the basics to get your
environment up and running.
Regards,
Tom
William Colls wrote:
Win XP Professional
Progress 9.1D patch 05
I have down loaded posse 3.0 baseline 3, and unpacked it all, but am
unsure how to proceed now to actually build the system. I have the old
wincvs.doc (icf 2 baseline 4), but am unsure of what may have changed,
and could not find an updated version on the
Posse site (but maybe I looked in the wrong place). I have down loaded
The Progress Dynamics documentation, but the install guide there doesn't
seem to be applicable either. So if someone has a few pointers as to
what I need to do next, they would be greatly appreciated.
--
/* =============================================================== */
I know you believe you understand what you think I said, but I am not
sure you realize that what you heard was not what I meant.
William E Colls President
Tel 613 591 0079 PROComputer Systems
Fax 613 591 3924 67 Willow Glen Dr.
www.procomsys.com Kanata Ontario K2M 1T1
Specialists in Progress Database systems since 1986
To unsubscribe, e-mail: dev-unsubscribe@dynamics.possenet.org
For additional commands, e-mail: dev-help@dynamics.possenet.org
--
Tom Nordhougen
Progress Software Corp.
http://www.progress.com
The art of progress is to preserve order amid change, and
to preserve change amid order. -Alfred North Whitehead
To unsubscribe, e-mail: dev-unsubscribe@dynamics.possenet.org
For additional commands, e-mail: dev-help@dynamics.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@dynamics.possenet.org
For additional commands, e-mail: dev-help@dynamics.possenet.org
Hi all,
You can check Issuezilla 3740.
( http://www.possenet.org/issues/show_bug.cgi?id=3740 )
This submission contains a set of 4GL programs to assist with the
building of a Dynamics environment using a POSSE download (either using
CVS, or using a baseline.
The programs may need to be updated though, like for example refer to
dynamics instead of icf, but it should work.
The tool also creates the icfdb database but it does not set the
Dynamics site id so the DCU can be use for that instead.
Hope this helps,
Edsel
Tom Nordhougen wrote:
A couple things to note regarding the icf_and_cvs.pdf document:
- The icf directory (top level) has been renamed to dynamics
- There is no longer an rvdb database
- There is no need to load _seqvals.d into the icfdb database
- The correct PROPATH value for the client (icf.ini) should be:
c:\yourPosseDir\gui\dynamics,
c:\yourPosseDir\src\dynamics,
c:\yourPosseDir\src\dynamics\af\sup2,
c:\yourPosseDir\gui,
c:\yourPosseDir\gui\adecomm.pl,
c:\yourPosseDir\gui\adeicon.pl,
c:\yourPosseDir\gui\adeshar.pl,
c:\yourPosseDir\gui\adeuib.pl,
c:\yourPosseDir\gui\protools.pl,
c:\yourPosseDir\gui\adeedit.pl,
c:\yourPosseDir\gui\adedict.pl,
c:\yourPosseDir\gui\prodict.pl,
c:\yourPosseDir\gui\adecomp.pl,
c:\yourPosseDir\gui\adedesk.pl,
c:\yourPosseDir\gui\adexml.pl,
c:\yourPosseDir\gui\adeweb.pl,
c:\yourPosseDir,
c:\yourPosseDir\gui\aderes.pl,
c:\yourPosseDir\gui\adetran.pl,
c:\yourPosseDir\src,
C:\Program Files\PROGRESS\gui,
C:\Program Files\PROGRESS,
C:\Program Files\PROGRESS\bin
- You can create a new icfdb database using the DCU (Dynamics Configuration
Utility):
prowin32.exe -p c:\yourPosseDir\gui\dynamics\icfcfg.w -icfparam
DCUSETUPTYPE=ProgressSetup
This will ensure that your Dynamics site id is properly set.
Regards,
Tom
Original Message
Subject: Re: How to proceed from here
Date: Wed, 28 May 2003 18:19:41 -0400
From: Tom Nordhougen Reply-To: dev@dynamics.possenet.org
Organization: Progress Software Corporation
To: dev@dynamics.possenet.org
References: William,
Have a look at this document:
http://docs.possenet.org/whitepapers/icf_and_cvs.pdf
It is a bit out of date but it should give you the basics to get your
environment up and running.
Regards,
Tom
William Colls wrote:
Win XP Professional
Progress 9.1D patch 05
I have down loaded posse 3.0 baseline 3, and unpacked it all, but am
unsure how to proceed now to actually build the system. I have the old
wincvs.doc (icf 2 baseline 4), but am unsure of what may have changed,
and could not find an updated version on the
Posse site (but maybe I looked in the wrong place). I have down loaded
The Progress Dynamics documentation, but the install guide there doesn't
seem to be applicable either. So if someone has a few pointers as to
what I need to do next, they would be greatly appreciated.
--
/* =============================================================== */
I know you believe you understand what you think I said, but I am not
sure you realize that what you heard was not what I meant.
William E Colls President
Tel 613 591 0079 PROComputer Systems
Fax 613 591 3924 67 Willow Glen Dr.
www.procomsys.com Kanata Ontario K2M 1T1
Specialists in Progress Database systems since 1986
To unsubscribe, e-mail: dev-unsubscribe@dynamics.possenet.org
For additional commands, e-mail: dev-help@dynamics.possenet.org
--
Tom Nordhougen
Progress Software Corp.
http://www.progress.com
The art of progress is to preserve order amid change, and
to preserve change amid order. -Alfred North Whitehead
To unsubscribe, e-mail: dev-unsubscribe@dynamics.possenet.org
For additional commands, e-mail: dev-help@dynamics.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@dynamics.possenet.org
For additional commands, e-mail: dev-help@dynamics.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@dynamics.possenet.org
For additional commands, e-mail: dev-help@dynamics.possenet.org