Dear Peggers,
Dynamics V2, SP 01.
Windows 2000.
Can somebody please suggest how to change tab order for widgets in Dynamic Viewer?
If I change it thru property sheet of Dynamic Viewer in AppBuilder from 'Default' to let's say 'Left to right by columns' and save the viewer and close it, Next time I open the viewer and check it, it is changed back to default automatically.
TIA,
Anand.
Hi Anand,
Each field on the viewer has a dynamic property called 'Order' and you can
change the tab sequence of the fields by changing this order property
accordingly.
Clare
-Original Message-
Sent: 07 March 2003 06:51
To: dev@icf.possenet.org
Subject: TAB Order in Dynamic Viewers
Dear Peggers,
Dynamics V2, SP 01.
Windows 2000.
Can somebody please suggest how to change tab order for widgets in Dynamic
Viewer?
If I change it thru property sheet of Dynamic Viewer in AppBuilder from
'Default' to let's say 'Left to right by columns' and save the viewer and
close it, Next time I open the viewer and check it, it is changed back to
default automatically.
TIA,
Anand.
Does order field work with Dynamic lookups and Combos ?
I think not. I think this is an important issue we noticed already in Dynamics 2 on December. Technical support logged the issue as high priority. We were very surprised to notice that this problem was not fixed in Dynamics SP1 !!
-Veli-Matti Korhonen
Lähettäjä: Clare Ward Päiväys: 2003/03/07 pe AM 11:06:53 GMT+02:00
Vastaanottaja: "'dev@icf.possenet.org'" Aihe: RE: TAB Order in Dynamic Viewers
Hi Anand,
Each field on the viewer has a dynamic property called 'Order' and you can
change the tab sequence of the fields by changing this order property
accordingly.
Clare
-Original Message-
Sent: 07 March 2003 06:51
To: dev@icf.possenet.org
Subject: TAB Order in Dynamic Viewers
Dear Peggers,
Dynamics V2, SP 01.
Windows 2000.
Can somebody please suggest how to change tab order for widgets in Dynamic
Viewer?
If I change it thru property sheet of Dynamic Viewer in AppBuilder from
'Default' to let's say 'Left to right by columns' and save the viewer and
close it, Next time I open the viewer and check it, it is changed back to
default automatically.
TIA,
Anand.
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
Well i have it working with dynamic viewers for all fields apart from
dynamic combos and lookups.
Clare
-Original Message-
Sent: 10 March 2003 07:57
To: dev@icf.possenet.org
Subject: Re: RE: TAB Order in Dynamic Viewers
Does order field work with Dynamic lookups and Combos ?
I think not. I think this is an important issue we noticed already in
Dynamics 2 on December. Technical support logged the issue as high priority.
We were very surprised to notice that this problem was not fixed in Dynamics
SP1 !!
-Veli-Matti Korhonen
Lähettäjä: Clare Ward Päiväys: 2003/03/07 pe AM 11:06:53 GMT+02:00
Vastaanottaja: "'dev@icf.possenet.org'" Aihe: RE: TAB Order in Dynamic Viewers
Hi Anand,
Each field on the viewer has a dynamic property called 'Order' and you can
change the tab sequence of the fields by changing this order property
accordingly.
Clare
-Original Message-
Sent: 07 March 2003 06:51
To: dev@icf.possenet.org
Subject: TAB Order in Dynamic Viewers
Dear Peggers,
Dynamics V2, SP 01.
Windows 2000.
Can somebody please suggest how to change tab order for widgets in Dynamic
Viewer?
If I change it thru property sheet of Dynamic Viewer in AppBuilder from
'Default' to let's say 'Left to right by columns' and save the viewer and
close it, Next time I open the viewer and check it, it is changed back to
default automatically.
TIA,
Anand.
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
But you can workaround this by running the procedure AdjustTabOrder in the
viewer super procedure.
-Original Message-
Sent: 10 March 2003 19:21
To: dev@icf.possenet.org
Subject: RE: RE: TAB Order in Dynamic Viewers
Hi,
This issue was fixed and will be in V2 SP2. See issue 6483 on IssueZilla for
more details.
http://www.possenet.org/issues/show_bug.cgi?id=6483
Mark Davies
Project Leader
Tel: +27 (0)11 575-1836 (Direct)
Tel: +27 (0)11 575-1800 (Switchboard)
Fax: +27 (0)11 576-2601
Cell: +27 (0)73 287 1254
MIP
2nd Floor, Zone 2
Wrigley Field, The Campus
Sloane Avenue, Bryanston
-Original Message-
Sent: 10 Maart 2003 01:06
To: dev@icf.possenet.org
Subject: RE: RE: TAB Order in Dynamic Viewers
Well i have it working with dynamic viewers for all fields apart from
dynamic combos and lookups.
Clare
-Original Message-
Sent: 10 March 2003 07:57
To: dev@icf.possenet.org
Subject: Re: RE: TAB Order in Dynamic Viewers
Does order field work with Dynamic lookups and Combos ?
I think not. I think this is an important issue we noticed already in
Dynamics 2 on December. Technical support logged the issue as high priority.
We were very surprised to notice that this problem was not fixed in Dynamics
SP1 !!
-Veli-Matti Korhonen
Lähettäjä: Clare Ward Päiväys: 2003/03/07 pe AM 11:06:53 GMT+02:00
Vastaanottaja: "'dev@icf.possenet.org'" Aihe: RE: TAB Order in Dynamic Viewers
Hi Anand,
Each field on the viewer has a dynamic property called 'Order' and you can
change the tab sequence of the fields by changing this order property
accordingly.
Clare
-Original Message-
Sent: 07 March 2003 06:51
To: dev@icf.possenet.org
Subject: TAB Order in Dynamic Viewers
Dear Peggers,
Dynamics V2, SP 01.
Windows 2000.
Can somebody please suggest how to change tab order for widgets in Dynamic
Viewer?
If I change it thru property sheet of Dynamic Viewer in AppBuilder from
'Default' to let's say 'Left to right by columns' and save the viewer and
close it, Next time I open the viewer and check it, it is changed back to
default automatically.
TIA,
Anand.
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
______________________________________
This e-mail may contain confidential information and may be legally
privileged and is intended only for the person to whom it is addressed. If
you are not the intended recipient, you are notified that you may not use,
distribute or copy this document in any manner whatsoever. Kindly also
notify the sender immediately by telephone, and delete the e-mail. When
addressed to clients of the company from where this e-mail originates ("the
sending company ") any opinion or advice contained in this e-mail is subject
to the terms and conditions expressed in any applicable terms of business or
client engagement letter . The sending company does not accept liability for
any damage, loss or expense arising from this e-mail and/or from the
accessing of any files attached to this e-mail.
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
Thanks Clare!
Nobody told me before that there is workaround and I did not spend much time to find any because I was very sure this problem would have been fixed very fast as most of the viewers have dynamic lookups and combos.
I tested AdjustTabOrder tab order and it works!
Now it will be much nicer to do Dynamcis demos!
Best regards,
-Veli-Matti
Lähettäjä: Clare Ward Päiväys: 2003/03/10 ma AM 11:27:07 GMT+02:00
Vastaanottaja: dev@icf.possenet.org
Aihe: RE: RE: TAB Order in Dynamic Viewers
But you can workaround this by running the procedure AdjustTabOrder in the
viewer super procedure.
-Original Message-
Sent: 10 March 2003 19:21
To: dev@icf.possenet.org
Subject: RE: RE: TAB Order in Dynamic Viewers
Hi,
This issue was fixed and will be in V2 SP2. See issue 6483 on IssueZilla for
more details.
http://www.possenet.org/issues/show_bug.cgi?id=6483
Mark Davies
Project Leader
Tel: +27 (0)11 575-1836 (Direct)
Tel: +27 (0)11 575-1800 (Switchboard)
Fax: +27 (0)11 576-2601
Cell: +27 (0)73 287 1254
MIP
2nd Floor, Zone 2
Wrigley Field, The Campus
Sloane Avenue, Bryanston
-Original Message-
Sent: 10 Maart 2003 01:06
To: dev@icf.possenet.org
Subject: RE: RE: TAB Order in Dynamic Viewers
Well i have it working with dynamic viewers for all fields apart from
dynamic combos and lookups.
Clare
-Original Message-
Sent: 10 March 2003 07:57
To: dev@icf.possenet.org
Subject: Re: RE: TAB Order in Dynamic Viewers
Does order field work with Dynamic lookups and Combos ?
I think not. I think this is an important issue we noticed already in
Dynamics 2 on December. Technical support logged the issue as high priority.
We were very surprised to notice that this problem was not fixed in Dynamics
SP1 !!
-Veli-Matti Korhonen
Lähettäjä: Clare Ward Päiväys: 2003/03/07 pe AM 11:06:53 GMT+02:00
Vastaanottaja: "'dev@icf.possenet.org'" Aihe: RE: TAB Order in Dynamic Viewers
Hi Anand,
Each field on the viewer has a dynamic property called 'Order' and you can
change the tab sequence of the fields by changing this order property
accordingly.
Clare
-Original Message-
Sent: 07 March 2003 06:51
To: dev@icf.possenet.org
Subject: TAB Order in Dynamic Viewers
Dear Peggers,
Dynamics V2, SP 01.
Windows 2000.
Can somebody please suggest how to change tab order for widgets in Dynamic
Viewer?
If I change it thru property sheet of Dynamic Viewer in AppBuilder from
'Default' to let's say 'Left to right by columns' and save the viewer and
close it, Next time I open the viewer and check it, it is changed back to
default automatically.
TIA,
Anand.
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
______________________________________
This e-mail may contain confidential information and may be legally
privileged and is intended only for the person to whom it is addressed. If
you are not the intended recipient, you are notified that you may not use,
distribute or copy this document in any manner whatsoever. Kindly also
notify the sender immediately by telephone, and delete the e-mail. When
addressed to clients of the company from where this e-mail originates ("the
sending company ") any opinion or advice contained in this e-mail is subject
to the terms and conditions expressed in any applicable terms of business or
client engagement letter . The sending company does not accept liability for
any damage, loss or expense arising from this e-mail and/or from the
accessing of any files attached to this e-mail.
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
Hi,
This issue was fixed and will be in V2 SP2. See issue 6483 on IssueZilla for
more details.
http://www.possenet.org/issues/show_bug.cgi?id=6483
Mark Davies
Project Leader
Tel: +27 (0)11 575-1836 (Direct)
Tel: +27 (0)11 575-1800 (Switchboard)
Fax: +27 (0)11 576-2601
Cell: +27 (0)73 287 1254
MIP
2nd Floor, Zone 2
Wrigley Field, The Campus
Sloane Avenue, Bryanston
-Original Message-
Sent: 10 Maart 2003 01:06
To: dev@icf.possenet.org
Subject: RE: RE: TAB Order in Dynamic Viewers
Well i have it working with dynamic viewers for all fields apart from
dynamic combos and lookups.
Clare
-Original Message-
Sent: 10 March 2003 07:57
To: dev@icf.possenet.org
Subject: Re: RE: TAB Order in Dynamic Viewers
Does order field work with Dynamic lookups and Combos ?
I think not. I think this is an important issue we noticed already in
Dynamics 2 on December. Technical support logged the issue as high priority.
We were very surprised to notice that this problem was not fixed in Dynamics
SP1 !!
-Veli-Matti Korhonen
Lähettäjä: Clare Ward Päiväys: 2003/03/07 pe AM 11:06:53 GMT+02:00
Vastaanottaja: "'dev@icf.possenet.org'" Aihe: RE: TAB Order in Dynamic Viewers
Hi Anand,
Each field on the viewer has a dynamic property called 'Order' and you can
change the tab sequence of the fields by changing this order property
accordingly.
Clare
-Original Message-
Sent: 07 March 2003 06:51
To: dev@icf.possenet.org
Subject: TAB Order in Dynamic Viewers
Dear Peggers,
Dynamics V2, SP 01.
Windows 2000.
Can somebody please suggest how to change tab order for widgets in Dynamic
Viewer?
If I change it thru property sheet of Dynamic Viewer in AppBuilder from
'Default' to let's say 'Left to right by columns' and save the viewer and
close it, Next time I open the viewer and check it, it is changed back to
default automatically.
TIA,
Anand.
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org
______________________________________
This e-mail may contain confidential information and may be legally
privileged and is intended only for the person to whom it is addressed. If
you are not the intended recipient, you are notified that you may not use,
distribute or copy this document in any manner whatsoever. Kindly also
notify the sender immediately by telephone, and delete the e-mail. When
addressed to clients of the company from where this e-mail originates ("the
sending company ") any opinion or advice contained in this e-mail is subject
to the terms and conditions expressed in any applicable terms of business or
client engagement letter . The sending company does not accept liability for
any damage, loss or expense arising from this e-mail and/or from the
accessing of any files attached to this e-mail.
To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org
For additional commands, e-mail: dev-help@icf.possenet.org