Hi,
Using Dynamics 2.0, I am trying to add a dynamic lookup to a viewer so I do
the following steps:
- I create a dynamiclookup for my cmc_country table
- open dynamic viewer which needs a lookup on country table
- add field: country_obj to viewer
- from the Pallete, right-mouseclick on SmartDataField and choose dynamicLookup
- drop it on the country_obj field
Then I get error:
Cannot launch container rysdfchsew. (RY:6)
Any idea of what's wrong?
Martin
Mark,
That's correct.
I will download the posse_30 tag now and use that.
Martin
-Original Message-
Sent: Thursday, February 13, 2003 4:19 PM
To: dev@icf.possenet.org
Subject: RE: Dynamics 2; DynLookup
Hi Martin,
The error you are getting is telling me that you did a download from
POSSE_MAIN and not POSSE_30 from CVS. Is that correct?
The error you are seeing was a change I made to Dynamic Lookups and Combos,
but this was only checked into POSSE_MAIN, which is the current working
environment for Dynamics Developers. If your intention was to use the latest
code from POSSE_MAIN, you should ensure that you have the latest data by
uploading any new .ado files too.
HTH
Mark Davies
Project Leader
Tel: +27 (0)11 575-1836 (Direct)
Tel: +27 (0)11 575-1800 (Switchboard)
Fax: +27 (0)11 576-2601
Cell: +27 (0)73 287 1254
MIP
2nd Floor, Zone 2
Wrigley Field, The Campus
Sloane Avenue, Bryanston
-Original Message-
Sent: 12 Februarie 2003 01:15 nm
To: dev@icf.possenet.org
Subject: Dynamics 2; DynLookup
Hi,
Using Dynamics 2.0, I am trying to add a dynamic lookup to a viewer so I do
the following steps:
- I create a dynamiclookup for my cmc_country table
- open dynamic viewer which needs a lookup on country table
- add field: country_obj to viewer
- from the Pallete, right-mouseclick on SmartDataField and choose
dynamicLookup
- drop it on the country_obj field
Then I get error:
Cannot launch container rysdfchsew. (RY:6)
Any idea of what's wrong?
Martin
______________________________________
This e-mail may contain confidential information and may be legally
privileged and is intended only for the person to whom it is addressed. If
you are not the intended recipient, you are notified that you may not use,
distribute or copy this document in any manner whatsoever. Kindly also
notify the sender immediately by telephone, and delete the e-mail. When
addressed to clients of the company from where this e-mail originates ("the
sending company ") any opinion or advice contained in this e-mail is subject
to the terms and conditions expressed in any applicable terms of business or
client engagement letter . The sending company does not accept liability for
any damage, loss or expense arising from this e-mail and/or from the
accessing of any files attached to this e-mail.
Hi Martin,
The error you are getting is telling me that you did a download from
POSSE_MAIN and not POSSE_30 from CVS. Is that correct?
The error you are seeing was a change I made to Dynamic Lookups and Combos,
but this was only checked into POSSE_MAIN, which is the current working
environment for Dynamics Developers. If your intention was to use the latest
code from POSSE_MAIN, you should ensure that you have the latest data by
uploading any new .ado files too.
HTH
Mark Davies
Project Leader
Tel: +27 (0)11 575-1836 (Direct)
Tel: +27 (0)11 575-1800 (Switchboard)
Fax: +27 (0)11 576-2601
Cell: +27 (0)73 287 1254
MIP
2nd Floor, Zone 2
Wrigley Field, The Campus
Sloane Avenue, Bryanston
-Original Message-
Sent: 12 Februarie 2003 01:15 nm
To: dev@icf.possenet.org
Subject: Dynamics 2; DynLookup
Hi,
Using Dynamics 2.0, I am trying to add a dynamic lookup to a viewer so I do
the following steps:
- I create a dynamiclookup for my cmc_country table
- open dynamic viewer which needs a lookup on country table
- add field: country_obj to viewer
- from the Pallete, right-mouseclick on SmartDataField and choose
dynamicLookup
- drop it on the country_obj field
Then I get error:
Cannot launch container rysdfchsew. (RY:6)
Any idea of what's wrong?
Martin
______________________________________
This e-mail may contain confidential information and may be legally
privileged and is intended only for the person to whom it is addressed. If
you are not the intended recipient, you are notified that you may not use,
distribute or copy this document in any manner whatsoever. Kindly also
notify the sender immediately by telephone, and delete the e-mail. When
addressed to clients of the company from where this e-mail originates ("the
sending company ") any opinion or advice contained in this e-mail is subject
to the terms and conditions expressed in any applicable terms of business or
client engagement letter . The sending company does not accept liability for
any damage, loss or expense arising from this e-mail and/or from the
accessing of any files attached to this e-mail.